Sherwin-Williams Sher-Wood Hi-Bild Precat
The figures Sherwin-Williams (industrial wood) prints for Sherwin-Williams Sher-Wood Hi-Bild Precat on its own data sheet, at the conditions it names. Where the sheet doesn't give a figure, this page says so rather than borrow one from another product.
- Dry to the touch
- Not on the sheet we read
- Recoat
- 30–50 min
- Ready for use
- Not on the sheet we read
- Full cure
- Not on the sheet we read
- Coverage
- Not on the sheet we read
- Thinning
- Not on the sheet we read
- VOC
- 576.6–641.72 g/L maximum
- Conditions
- 77 °F
- Indoors or out
- Interior
- Food contact
- The sheet we read makes no food-contact statement
One source: Sherwin-Williams (industrial wood), the maker of that product
From the sheet: Dry to sand or recoat in 30–50 minutes; four-month pot life once catalyzed; a spray product for shops.
Against its kind
Sherwin-Williams Sher-Wood Hi-Bild Precat is one of the products in pre-catalyzed lacquer (solvent-based; here is that kind across every maker we have read.
Pre-catalyzed lacquer (solvent-based: recoat across makers
Only one maker’s sheet so far, so no class value: see its own figure above.
Pre-catalyzed lacquer (solvent-based: coverage across makers
No maker we read prints a coverage.
Related
- Every product of this kind: lacquer
- Polyurethane vs lacquer
- If it goes wrong: raised grain, orange peel, fisheyes, dust nibs, cloudy or white finish (blushing), cracking or crazing
- How much to buy: finish coverage calculator
- Every finish side by side: finish dry time chart
- What the federal rules say about finishes and food: food-contact finishes
Work it out for your project
- Plan your coats of this finish
Pick the piece and the wood, then get a dated coat schedule from the product’s own sheet.