PVA (yellow and white wood glue)
Titebond Quick & Thick
The figures Franklin International (Titebond) prints for Titebond Quick & Thick on its own specification sheet, at the conditions it names. Where the sheet doesn't give a figure, this page says so rather than borrow one from another product.
- Open time
- 3–5 min
- Total assembly time
- 10–15 min
- Clamp time
- Not on the sheet we read
- Cure
- Not on the sheet we read
- Lowest temperature
- 50 °F (10 °C)
- Water resistance
- Not recommended for exterior use or where moisture is likely
- VOC
- Not on the sheet we read
- Conditions
- 70 °F, 50 % RH
- Food contact
- The sheet we read makes no food-contact statement
One source: Franklin International (Titebond), the maker of that product
From the sheet: A thick (thixotropic) PVA for wood and other porous materials.
Related
- Every glue side by side: wood glue dry time chart
- Glue types and how they work: wood glue
- What Type I and Type II water resistance mean: Type I vs Type II glue
- Titebond Original, II and III together: Titebond comparison
Work it out for your project
- Plan the finish for your project
Pick the piece and the wood, then get a dated coat schedule from the product’s own sheet.