PVA (yellow and white wood glue)
Titebond II Extend
The figures Franklin International (Titebond) prints for Titebond II Extend on its own specification sheet, at the conditions it names. Where the sheet doesn't give a figure, this page says so rather than borrow one from another product.
- Open time
- 15 min
- Total assembly time
- 20–25 min
- Clamp time
- Not on the sheet we read
- Cure
- Not on the sheet we read
- Lowest temperature
- 60 °F (15.6 °C)
- Water resistance
- ANSI/HPVA Type II (water-resistant)
- VOC
- 3.8 g/L
- Conditions
- 70 °F, 50 % RH
- Food contact
- The sheet we read makes no food-contact statement
One source: Franklin International (Titebond), the maker of that product
From the sheet: A modified cross-linking PVA with a slower set; not for continuous submersion, below the waterline, or structural use.
Related
- Every glue side by side: wood glue dry time chart
- Glue types and how they work: wood glue
- What Type I and Type II water resistance mean: Type I vs Type II glue
- Titebond Original, II and III together: Titebond comparison
Work it out for your project
- Plan the finish for your project
Pick the piece and the wood, then get a dated coat schedule from the product’s own sheet.