PVA (yellow and white wood glue)
Titebond II Dark
The figures Franklin International (Titebond) prints for Titebond II Dark on its own specification sheet, at the conditions it names. Where the sheet doesn't give a figure, this page says so rather than borrow one from another product.
- Open time
- 5 min
- Total assembly time
- 10–15 min
- Clamp time
- Not on the sheet we read
- Cure
- Not on the sheet we read
- Lowest temperature
- 55 °F (12.8 °C)
- Water resistance
- ANSI/HPVA Type II (water-resistant)
- VOC
- Not on the sheet we read
- Conditions
- 70 °F, 50 % RH
- Food contact
- “Not FDA approved for indirect food contact”
One source: Franklin International (Titebond), the maker of that product
From the sheet: A cross-linking PVA that dries dark, for dark woods.
Related
- Every glue side by side: wood glue dry time chart
- Glue types and how they work: wood glue
- What Type I and Type II water resistance mean: Type I vs Type II glue
- Titebond Original, II and III together: Titebond comparison
Work it out for your project
- Plan the finish for your project
Pick the piece and the wood, then get a dated coat schedule from the product’s own sheet.