Rubio Monocoat Oil Plus 2C
The figures Rubio Monocoat prints for Rubio Monocoat Oil Plus 2C on its own data sheet, at the conditions it names. Where the sheet doesn't give a figure, this page says so rather than borrow one from another product.
- Dry to the touch
- Not on the sheet we read
- Recoat
- Not on the sheet we read
- Wipe or second application
- remove all excess within 15 minutes per zone
- Ready for use
- 24–36 h (use (80 % cured in 2 days))
- Full cure
- Not on the sheet we read
- Coverage
- 30–50 m² per litre
- Thinning
- Do not dilute
- VOC
- 0 g/L (both parts)
- Conditions
- Not on the sheet we read
- Indoors or out
- Interior
- Food contact
- The sheet we read makes no food-contact statement
One source: Rubio Monocoat, the maker of that product
From the sheet: Two-part: mix about 3 parts A to 1 part B; one coat; clean with water and soap after 5 days.
What the maker names it for
- For: floors, furniture, kitchens and bathrooms.
Against its kind
Rubio Monocoat Oil Plus 2C is one of the products in hardwax oils; here is that kind across every maker we have read.
Hardwax oils: recoat across makers
Only one maker’s sheet so far, so no class value: see its own figure above.
Hardwax oils: coverage across makers
1,304 sq ft/gal
span 978–2,037 sq ft/gal, per coat
Only two sources publish this: Osmo and Rubio Monocoat
Related
- Every product of this kind: hardwax oil
- Hardwax oil vs polyurethane
- How much to buy: finish coverage calculator
- Every finish side by side: finish dry time chart
- What the federal rules say about finishes and food: food-contact finishes
Work it out for your project
- Plan your coats of this finish
Pick the piece and the wood, then get a dated coat schedule from the product’s own sheet.