43/64 inch in decimal and mm
Decimal inches
0.671875 in
0.6719 in to four places
Millimetres
17.065625 mm
From the standard, the international inch, 25.4 mm exactly
The math
- A fraction is its top number divided by its bottom number: 43/64 in = 43 ÷ 64 = 0.671875 in.
- An inch is exactly 25.4 mm, so 0.671875 × 25.4 = 17.065625 mm, or 17.066 mm to three places.
- In feet, divide by 12: 0.671875 ÷ 12 = 0.05599 ft. In centimetres, divide the mm by 10: 1.7065625 cm.
43/64 to the nearest 1/8, 1/16, 1/32
A tape or rule marked more coarsely than 64ths can’t show 43/64 exactly. The nearest marks, and how far off each is (plus means the mark is bigger; a size exactly halfway goes to the bigger mark):
| Nearest | Mark | Off by (in) | Off by (mm) |
|---|---|---|---|
| 1/8 | 5/8 in | −0.046875 | −1.191 |
| 1/16 | 11/16 in | +0.015625 | +0.397 |
| 1/32 | 11/16 in | +0.015625 | +0.397 |
Drills, plywood and lumber at 43/64 in
| Drill | Size | Off by |
|---|---|---|
| 17 mm | 0.6693 in | −0.0656 mm |
| 17.5 mm | 0.689 in | +0.4344 mm |
Every drill is on the drill bit size chart.
Bits of this size
Sizes either side
Every size is on the fraction to decimal chart; any other size goes in the fraction to decimal calculator.