29/64 inch in decimal and mm
Decimal inches
0.453125 in
0.4531 in to four places
Millimetres
11.509375 mm
From the standard, the international inch, 25.4 mm exactly
The math
- A fraction is its top number divided by its bottom number: 29/64 in = 29 ÷ 64 = 0.453125 in.
- An inch is exactly 25.4 mm, so 0.453125 × 25.4 = 11.509375 mm, or 11.509 mm to three places.
- In feet, divide by 12: 0.453125 ÷ 12 = 0.03776 ft. In centimetres, divide the mm by 10: 1.1509375 cm.
29/64 to the nearest 1/8, 1/16, 1/32
A tape or rule marked more coarsely than 64ths can’t show 29/64 exactly. The nearest marks, and how far off each is (plus means the mark is bigger; a size exactly halfway goes to the bigger mark):
| Nearest | Mark | Off by (in) | Off by (mm) |
|---|---|---|---|
| 1/8 | 1/2 in | +0.046875 | +1.191 |
| 1/16 | 7/16 in | −0.015625 | −0.397 |
| 1/32 | 15/32 in | +0.015625 | +0.397 |
Drills, plywood and lumber at 29/64 in
| Drill | Size | Off by |
|---|---|---|
| 11.5 mm | 0.4528 in | −0.0094 mm |
| 11.6 mm | 0.4567 in | +0.0906 mm |
Every drill is on the drill bit size chart.
Bits of this size
Sizes either side
Every size is on the fraction to decimal chart; any other size goes in the fraction to decimal calculator.