15/16 inch in decimal and mm
Decimal inches
0.9375 in
Millimetres
23.8125 mm
From the standard, the international inch, 25.4 mm exactly
The math
- A fraction is its top number divided by its bottom number: 15/16 in = 15 ÷ 16 = 0.9375 in.
- An inch is exactly 25.4 mm, so 0.9375 × 25.4 = 23.8125 mm, or 23.813 mm to three places.
- In feet, divide by 12: 0.9375 ÷ 12 = 0.078125 ft. In centimetres, divide the mm by 10: 2.38125 cm.
- The same size in finer steps: 15/16 = 30/32 = 60/64. A tape marked in 16ths, 32nds or 64ths shows it at those marks.
15/16 to the nearest 1/8
A tape or rule marked more coarsely than 16ths can’t show 15/16 exactly. The nearest marks, and how far off each is (plus means the mark is bigger; a size exactly halfway goes to the bigger mark):
| Nearest | Mark | Off by (in) | Off by (mm) |
|---|---|---|---|
| 1/8 | 1 in | +0.0625 | +1.588 |
Drills, plywood and lumber at 15/16 in
| Drill | Size | Off by |
|---|---|---|
| 23.5 mm | 0.9252 in | −0.3125 mm |
| 24 mm | 0.9449 in | +0.1875 mm |
Every drill is on the drill bit size chart.
Bits of this size
Sizes either side
Every size is on the fraction to decimal chart; any other size goes in the fraction to decimal calculator.