1-11/16 inch in decimal and mm
Decimal inches
1.6875 in
Millimetres
42.8625 mm
From the standard, the international inch, 25.4 mm exactly
The math
- A fraction is its top number divided by its bottom number: 1-11/16 in = 1 + 11 ÷ 16 = 1.6875 in.
- An inch is exactly 25.4 mm, so 1.6875 × 25.4 = 42.8625 mm, or 42.863 mm to three places.
- In feet, divide by 12: 1.6875 ÷ 12 = 0.140625 ft. In centimetres, divide the mm by 10: 4.28625 cm.
- The same size in finer steps: 1-11/16 = 1-22/32 = 1-44/64. A tape marked in 16ths, 32nds or 64ths shows it at those marks.
1-11/16 to the nearest 1/8
A tape or rule marked more coarsely than 16ths can’t show 1-11/16 exactly. The nearest marks, and how far off each is (plus means the mark is bigger; a size exactly halfway goes to the bigger mark):
| Nearest | Mark | Off by (in) | Off by (mm) |
|---|---|---|---|
| 1/8 | 1-3/4 in | +0.0625 | +1.588 |
Drills, plywood and lumber at 1-11/16 in
No drill, plywood or lumber on our charts is exactly 1-11/16 in. The nearest drills are below.
| Drill | Size | Off by |
|---|---|---|
| 1 in | 1 in | −0.6875 in |
| 25 mm | 0.9843 in | −17.8625 mm |
Every drill is on the drill bit size chart.
Sizes either side
Every size is on the fraction to decimal chart; any other size goes in the fraction to decimal calculator.