Scroll saw blade chart: TPI by blade number
| Blade | TPI | Olson | Pegas | Flying Dutchman | Pegas stock |
|---|---|---|---|---|---|
| #2/0 | 28.2 | 28 | 28.2 | 30.5 | .06"–1/4" |
| #1 | 24.35 | — | 22.7 | 26 | 1/10"–1/3" |
| #2 | 20.5 | 20 | 21 | — | 1/8"–2/5" |
| #3 | 20 | — | 19.5 | 20.5 | 1/6"–2/5" |
| #4 | 16.55 | 15 | 18.1 | — | 1/5"–1/2" |
| #5 | 16.5 | 12.5 | 16.9 | 16.5 | 1/3"–3/5" |
| #7 | 14 | 11.5 | 14.9 | 14 | 2/5"–4/5" |
| #9 | 13.4 | 11.5 | 13.4 | 14 | 1/2"–1" |
| #12 | 11.5 | 9.5 | 11.5 | 13 | 4/5"–2" |
| Saw | Blade TPI | Strokes/min | For |
|---|---|---|---|
| Grizzly G0734 | 10 | 1,200–1,650 | General cutting, hard and soft woods 3/16"–2" |
| Grizzly G0734 | 15 | 700–1,200 | Thin wood and plastic 3/32"–1/2" |
| Grizzly G0734 | 18 | 550–700 | Tight turns in thin wood 3/32"–1/8" |
| Ryobi SC164VS | 10 | 1,200–1,600 | Hard and soft woods 3/16"–2" |
| Ryobi SC164VS | 15 | 600–1,200 | Very thin cuts in wood and plastic 3/32"–1/2" |
| Ryobi SC164VS | 18 | 400–600 | Tight turns in thin material 3/32"–1/8" |
| WEN 3921 | 10–15 | 500–1,200 | Medium turns in 1/4"–1-3/4" wood |
| WEN 3921 | 15–28 | 800–1,700 | Small turns in 1/8"–1-1/2" wood |